Recently, I upgraded my GPU from an HD 7770 to an HD 7970, and I noticed I was getting FPS drops in games. I figured the VRMs were overheating on my old board (ASUS M5A78L-M LX V2) so I got a new board. A Gigabyte 990FXA-UD3. Apart from the unrelated issue of a winows crash on startup, which was fixed by switching from AHCI to IDE to boot and install drivers, the only seemingly minor issue was that I could no longer get as many FPS on lower settings in CS:GO as I could before. I could get more on maxed settings, and I got 3X as many FPS on Furmark, so it was an issue I was sure i could get to the bottom of.
BUT: The next day, I tried to power my PC on, and nothing happened. The fans spin, but there is no HDD activity, no POST screen (I guess...I dunno cus i got no picture on my screen) no beeps from the little case speaker...nothing. just fans at low RPM. I tried resetting CMOS (though shorting the pins in the dark with a screwdriver was tricky and I dunno if I got them. I'll try again this afternoon using the jumper from my old board, if it fits) I tried swapping the RAM around, putting it in different slots, trying one stick at a time, in different slots. I replaced the GPU with my old one, and all that happened was that the fan's RPM would kind of pulse. I'd had that problem before, and it was a failed PSU, so I went and got a new one. (The old one was a 500watt, so was cutting it pretty close)
Anyway, I just installed the new PSU, and I'm getting the same thing. I only plugged in the drive with my operating system on.
I need to try clearing the CMOS properly, and I need to maybe try different RAM, though I don't have any spare, and it worked fine for a day.
But...it's looking like either the board just died after 1 day of use, or the CPU died after one day in a new board. Both of which seem kind of odd. I still have my old board, so i can put everything back on that to rule out the CPU and the RAM, but I'd prefer to check first, to see if there are any checks i can do without having to strip everything outta there.
Any ideas? Oh, the CPU is an FX 8350, cooler is a coolermaster hyper 212 evo, My OS is on a Samsung 840 SSD. The RAM...I dunno. It was Kingston, i remember that. And I know it's 2X4GB, but without going and looking, that's all I know.
Old PSU was a corsair CX500. New one is a CX600m, and second-hand cus I wasn't sure enough that it was the cause.
I think that's all the info. Any ideas?
BUT: The next day, I tried to power my PC on, and nothing happened. The fans spin, but there is no HDD activity, no POST screen (I guess...I dunno cus i got no picture on my screen) no beeps from the little case speaker...nothing. just fans at low RPM. I tried resetting CMOS (though shorting the pins in the dark with a screwdriver was tricky and I dunno if I got them. I'll try again this afternoon using the jumper from my old board, if it fits) I tried swapping the RAM around, putting it in different slots, trying one stick at a time, in different slots. I replaced the GPU with my old one, and all that happened was that the fan's RPM would kind of pulse. I'd had that problem before, and it was a failed PSU, so I went and got a new one. (The old one was a 500watt, so was cutting it pretty close)
Anyway, I just installed the new PSU, and I'm getting the same thing. I only plugged in the drive with my operating system on.
I need to try clearing the CMOS properly, and I need to maybe try different RAM, though I don't have any spare, and it worked fine for a day.
But...it's looking like either the board just died after 1 day of use, or the CPU died after one day in a new board. Both of which seem kind of odd. I still have my old board, so i can put everything back on that to rule out the CPU and the RAM, but I'd prefer to check first, to see if there are any checks i can do without having to strip everything outta there.
Any ideas? Oh, the CPU is an FX 8350, cooler is a coolermaster hyper 212 evo, My OS is on a Samsung 840 SSD. The RAM...I dunno. It was Kingston, i remember that. And I know it's 2X4GB, but without going and looking, that's all I know.
Old PSU was a corsair CX500. New one is a CX600m, and second-hand cus I wasn't sure enough that it was the cause.
I think that's all the info. Any ideas?