Hello everyone,
Here's my problem. I recently got two Precision T3600 workstations with this configuration :
Xeon E5-1620 V1 (FCLGA2011)
16 Gb DDR3 ECC 1600Mhz
Nvidia Quadro 4000
635 W Gold Certified DELL PSU
BIOS version A14
The first one is working correctly but the second one is staring with no display, no keyboard/mouse. The computer's components are running normally, the power led is white as if it was functioning but the 1,2,3 & 4 diagnostic LED doesn't light on. Same with the HDD light.
I got the PC to work correctly the other day, no problem with shutdown and turning on many times (HDD & RAID configuration) but suddenly it stopped working again.
I already had this problem which was solved by taking out RAM and putting it back in again. It tried it and didn't worked this time. Wanna mention that I had an inductor near CPU (the bottom one) who dismounted in one side when cleaning. I soldered it back and the PC worked fine (not even sure it caused an issue).
Troubleshooting already tried :
- Removing CMOS Battery / Draining PSU power
- Removing RAM, putting it back in different configurations (DIMM 1 / DIMM2 / DIMM1 + DIMM 2 ... )
- Unplugging everything (HDD, CD, Peripherals, PCI cards)
- Unsealing / Resealing CPU
- Checking for bent CPU pins
- Using the second working T3600 PSU, Same with the RAM, with graphic card (Try other quadro 4000 and GTX 750Ti). Didn't try swapping CPU for the moment.
I don't know what to try now, I'm thinking it might be the motherboard or the CPU but it was functioning fine the other day and since I shut it down it's doing the same issue as before with no solution. Because I already solved it once I think I can do it again and it's not a dead component.
Thank you in advance for the help.
Here's my problem. I recently got two Precision T3600 workstations with this configuration :
Xeon E5-1620 V1 (FCLGA2011)
16 Gb DDR3 ECC 1600Mhz
Nvidia Quadro 4000
635 W Gold Certified DELL PSU
BIOS version A14
The first one is working correctly but the second one is staring with no display, no keyboard/mouse. The computer's components are running normally, the power led is white as if it was functioning but the 1,2,3 & 4 diagnostic LED doesn't light on. Same with the HDD light.
I got the PC to work correctly the other day, no problem with shutdown and turning on many times (HDD & RAID configuration) but suddenly it stopped working again.
I already had this problem which was solved by taking out RAM and putting it back in again. It tried it and didn't worked this time. Wanna mention that I had an inductor near CPU (the bottom one) who dismounted in one side when cleaning. I soldered it back and the PC worked fine (not even sure it caused an issue).
Troubleshooting already tried :
- Removing CMOS Battery / Draining PSU power
- Removing RAM, putting it back in different configurations (DIMM 1 / DIMM2 / DIMM1 + DIMM 2 ... )
- Unplugging everything (HDD, CD, Peripherals, PCI cards)
- Unsealing / Resealing CPU
- Checking for bent CPU pins
- Using the second working T3600 PSU, Same with the RAM, with graphic card (Try other quadro 4000 and GTX 750Ti). Didn't try swapping CPU for the moment.
I don't know what to try now, I'm thinking it might be the motherboard or the CPU but it was functioning fine the other day and since I shut it down it's doing the same issue as before with no solution. Because I already solved it once I think I can do it again and it's not a dead component.
Thank you in advance for the help.