jompenleet
Baseband Member
- Messages
- 27
- Location
- Sweden
Welcome! This is a Project Log by jompenleet.
This project is closing soon and iam starting a NEW PROJECT in a Phantom 820 case.
The upcoming project will contain more reviews, pictures & tutorials.
First i would like to thank all my sponsors
http://nzxt.com
http://kingston.com/en/ssd/hyperx/
http://mnpctech.com
I will be using the following from MNPCtech
24" x 12" Acrylic Sheet (Smoked)
http://www.mnpctech.com/acrylic_colored_sheets_casemod_windows1.html
24" x 12" APPLY 3M Di-Noc CARBON FIBER FILM
http://www.mnpctech.com/CarbonFiber_Gunmetal_Titanium.html
MNPCTech long sleeved shirt in XL.
http://www.mnpctech.com/Shirts1.html
120mm grill Cable fan guard. This will only be used to locate where to drill holes for extra fans.
http://www.mnpctech.com/Wire_Fan_Grill_Guard_Chrome.html
U-channel molding about 8ft. Only to try if it improves the look of the side panel.
http://www.mnpctech.com/moddersmesh.html
24" x 12" Modders Mesh sheet round hole 60% airflow Might use alot of this
http://www.mnpctech.com/moddersmesh.html
4x Silver Anodized Case Thumbscrew's 6/32 thread
http://www.mnpctech.com/thumbscrew.html
2 x Cable Management Grommet 1-1/2" Inner diameter 2-3/8" Outter diameter
http://www.mnpctech.com/PC_Cable_Rubber_Routing_Grommets.html
http://sleeva.se
Sleeva.se supplied me with all the sleeving, cable ties & shrink tubes you'll see in this project
http://timwill.se
Timwill's graphical designer helped me design all the logo's and stickers you'll see in this project
This picture is one of the most recent
Though i recommend you to check the last page in the thread for more pic's
Here is the original state of the NZXT Phantom 410 case. (Just moved the components of my old OEM computer into the case)..
Got a new Motherboard + processor + cpu cooler (Scythe Grand Kama Cross)
Got me some new fans here. Xigmatek 1253 as case fans & Xigmatek XAF Series 140mm for the CPU cooler
Here i actually cut a whole in the side of the case to give it a bigger window.. And i forgot to take pictures sorry.
Here's a link to the tutorial i followed to be able to do this!
http://www.youtube.com/watch?v=WpZoE-zj0-k
Thank's alot to MNPCtech for the really informative tutorials on case mods!!
Interior after hardmod sidepanel + psu cover & fully sleeved cables.
Tell me what u think!
P.S Im still waiting for my stormtrooper sticker & white LED tubes for the case
This project is closing soon and iam starting a NEW PROJECT in a Phantom 820 case.
The upcoming project will contain more reviews, pictures & tutorials.
First i would like to thank all my sponsors
http://nzxt.com
http://kingston.com/en/ssd/hyperx/
http://mnpctech.com
I will be using the following from MNPCtech
24" x 12" Acrylic Sheet (Smoked)
http://www.mnpctech.com/acrylic_colored_sheets_casemod_windows1.html
24" x 12" APPLY 3M Di-Noc CARBON FIBER FILM
http://www.mnpctech.com/CarbonFiber_Gunmetal_Titanium.html
MNPCTech long sleeved shirt in XL.
http://www.mnpctech.com/Shirts1.html
120mm grill Cable fan guard. This will only be used to locate where to drill holes for extra fans.
http://www.mnpctech.com/Wire_Fan_Grill_Guard_Chrome.html
U-channel molding about 8ft. Only to try if it improves the look of the side panel.
http://www.mnpctech.com/moddersmesh.html
24" x 12" Modders Mesh sheet round hole 60% airflow Might use alot of this
http://www.mnpctech.com/moddersmesh.html
4x Silver Anodized Case Thumbscrew's 6/32 thread
http://www.mnpctech.com/thumbscrew.html
2 x Cable Management Grommet 1-1/2" Inner diameter 2-3/8" Outter diameter
http://www.mnpctech.com/PC_Cable_Rubber_Routing_Grommets.html
http://sleeva.se
Sleeva.se supplied me with all the sleeving, cable ties & shrink tubes you'll see in this project
http://timwill.se
Timwill's graphical designer helped me design all the logo's and stickers you'll see in this project
This picture is one of the most recent
Though i recommend you to check the last page in the thread for more pic's
Here is the original state of the NZXT Phantom 410 case. (Just moved the components of my old OEM computer into the case)..
Got a new Motherboard + processor + cpu cooler (Scythe Grand Kama Cross)
Got me some new fans here. Xigmatek 1253 as case fans & Xigmatek XAF Series 140mm for the CPU cooler
Here i actually cut a whole in the side of the case to give it a bigger window.. And i forgot to take pictures sorry.
Here's a link to the tutorial i followed to be able to do this!
http://www.youtube.com/watch?v=WpZoE-zj0-k
Thank's alot to MNPCtech for the really informative tutorials on case mods!!
Interior after hardmod sidepanel + psu cover & fully sleeved cables.
Tell me what u think!
P.S Im still waiting for my stormtrooper sticker & white LED tubes for the case
Last edited by a moderator: