|  | 
12-27-2005, 12:10 PM
|
#1 (permalink)
|
Newb Techie Join Date: Dec 2005 Posts: 4
|  USB ports not working, please help
Hey guys, i have been using this MOBO (A8V-E Deluxe) for about 3 mounths, i have been running on the 2 usb ports on the front of my case which i plugged into the mobo when i got it. Now i want to use my back ones (4 ports) and they dont work..., i reformated yesterday and they still wont work. i am using windows xp home editon SP1. Is there anything i can do?
Thanks in advance, Ty | 
| | |
12-27-2005, 12:30 PM
|
#2 (permalink)
|
Master Techie Join Date: May 2005 Posts: 2,091
|
Go into the bios and make sure that the on-baord usb configuation is enabled. Sounds like the bios is not properly set up. When you go into the device manager and look at the reported USB bus do you see any exclamation points?? If they are not properly instaled you will need to brouse your mobo installation CD and find the USB hub drivers.
__________________
Noli Nothis Permittere Te Terere!!
EVGA 680i, Dual EVGA 8800GT'S (650/950), 4 gigs OCZ DDR2 1066, Intel Q9450 at 3.8 Ghz, Koolance Water Cooled, Dual Plextor16x DL DVD+/-RW. Dual WD 250gb 16mb Cache Sata 3.0. 3DMark06 score = 19,168. | |
| | |
12-27-2005, 12:58 PM
|
#3 (permalink)
|
Newb Techie Join Date: Dec 2005 Posts: 4
|
i checked in my bios and everything was enabled, under my devices nothing has a mark on it, its like evrythign is fine....here is pic  | |
| | |
12-27-2005, 01:03 PM
|
#4 (permalink)
|
Master Techie Join Date: May 2005 Posts: 2,091
|
Hmmmmm.....install Sp2: download it here: http://downloads.guru3d.com/download.php?det=846
let me know what happens after the install.
__________________
Noli Nothis Permittere Te Terere!!
EVGA 680i, Dual EVGA 8800GT'S (650/950), 4 gigs OCZ DDR2 1066, Intel Q9450 at 3.8 Ghz, Koolance Water Cooled, Dual Plextor16x DL DVD+/-RW. Dual WD 250gb 16mb Cache Sata 3.0. 3DMark06 score = 19,168. | |
| | |
12-27-2005, 01:41 PM
|
#5 (permalink)
|
Newb Techie Join Date: Dec 2005 Posts: 4
|
ok, i dl and installed service pack 2. USB ports still not working...
| |
| | |
12-27-2005, 02:49 PM
|
#6 (permalink)
|
Master Techie Join Date: May 2005 Posts: 2,091
|
Wow! I would try this. Remove the front port connectors to the mobo. Play close attention to the wiring protocol so you can reconnect the front USB ports. Do the rear ports now funciton?
__________________
Noli Nothis Permittere Te Terere!!
EVGA 680i, Dual EVGA 8800GT'S (650/950), 4 gigs OCZ DDR2 1066, Intel Q9450 at 3.8 Ghz, Koolance Water Cooled, Dual Plextor16x DL DVD+/-RW. Dual WD 250gb 16mb Cache Sata 3.0. 3DMark06 score = 19,168. | |
| | |
12-27-2005, 06:34 PM
|
#7 (permalink)
|
Newb Techie Join Date: Dec 2005 Posts: 4
|
i unplugged my front ones and now my back ones have ! on them in the device manager, where do i go from here?
| |
| | |
12-27-2005, 06:51 PM
|
#8 (permalink)
|
Master Techie Join Date: May 2005 Posts: 2,091
|
Okay...now you need to update the USB dirvers form your Mobo installatin CD. The USB bridge needs the drivers installed. insert the Mobo installation cd rom (if you don't have it, download it from the manufacturers website) and then right click on the ! device in the device manager. HIt the update driver tab when promted and then select install form cd etc. when promted. System32 and the registry will then be updated and the uSB bridge should then work. Then I would try to install the front side USB bus once the rear is functional.
__________________
Noli Nothis Permittere Te Terere!!
EVGA 680i, Dual EVGA 8800GT'S (650/950), 4 gigs OCZ DDR2 1066, Intel Q9450 at 3.8 Ghz, Koolance Water Cooled, Dual Plextor16x DL DVD+/-RW. Dual WD 250gb 16mb Cache Sata 3.0. 3DMark06 score = 19,168. | |
| | |
12-27-2005, 10:43 PM
|
#9 (permalink)
|
Newb Techie Join Date: Nov 2005 Posts: 3
| .....
what's your email add then rico? | |
| | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
| |
