comps messing up

soup lightning · 08-20-2005, 11:40 AM

the other day i turned it off w/ the power supply switch. started going slow once i turned it back on. its constantly freezing up, games are taking forever to load. ut2004 just crashed. everyitme i try and unzip bf2 i get teh not responding message. the other day i reformatted but it didnt fix it. now whenever i try and format it sayd theres no hd

Dark_Sniper* · 08-20-2005, 02:05 PM

Try to clear your CMOS if the hdd is not be decected something is wrong then. Jsut take the little battery out, turn the computer on for 8 to 10 seconds. Turn it off put the battery back in, turn the computer on and see what happens. IF the hdd still is being detected then try to reset your jumpers.

hope this helps

digitaloracle · 08-20-2005, 04:38 PM

Try that, and once you get it working again I would also run some general tests (such as memtest) to make sure your PSU didn't hurt anything (since it was the only change you mentioned, I am assuming it might be a problem). You really should run a test on your HD (if it is new-ish it has soemthing called SMART which reports a bunch of values for diagnostic purposes). I beleive the program speedfan can conduct such a test. Also check your voltages (using motherboardmonitor 5 or speedfan) and make sure that they are around what they should be and don't fluctate

soup lightning · 08-20-2005, 07:15 PM

ok, ill try it. i have the smart hdd thing enabled. whats memtest?

digitaloracle · 08-20-2005, 07:34 PM

it is a progam that comes on a bootable floppy od CD and runs several very good tests on your ram. You can donwload it here.

soup lightning · 08-20-2005, 08:06 PM

theres a black window like a command prompt taht says enter disk image source file name. i have no idea what that means

Counter-Strike · 08-20-2005, 11:31 PM

I would say re-format and see how it works. If it still does it, then check for bad PC parts..

soup lightning · 08-21-2005, 07:53 AM

ran memtest, it did 6 or 7 passes while i was gone and no errors. i cant reformat it. after it says to put the xp disc in it says theres no hdd. i reset the cmos too but nothing changed

DoomUK · 08-21-2005, 09:57 AM

As Dark_Sniper* said, take the CMOS battery out, then make sure you reseat it properly.

soup lightning · 08-21-2005, 11:00 AM

i did last night. everything but bf2 is working. that still freezes up and all my games are still loading really slow. windows is loading pretty slow too. takes a minute or two to get past the loading screen

08-20-2005, 11:40 AM	#1 (permalink)
soup lightning True Techie Join Date: May 2005 Posts: 161	comps messing up the other day i turned it off w/ the power supply switch. started going slow once i turned it back on. its constantly freezing up, games are taking forever to load. ut2004 just crashed. everyitme i try and unzip bf2 i get teh not responding message. the other day i reformatted but it didnt fix it. now whenever i try and format it sayd theres no hd

08-20-2005, 02:05 PM	#2 (permalink)
Dark_Sniper* Monster Techie Join Date: Feb 2005 Posts: 1,748	Try to clear your CMOS if the hdd is not be decected something is wrong then. Jsut take the little battery out, turn the computer on for 8 to 10 seconds. Turn it off put the battery back in, turn the computer on and see what happens. IF the hdd still is being detected then try to reset your jumpers. hope this helps __________________

08-20-2005, 04:38 PM	#3 (permalink)
digitaloracle Ultra Techie Join Date: May 2004 Posts: 725	Try that, and once you get it working again I would also run some general tests (such as memtest) to make sure your PSU didn't hurt anything (since it was the only change you mentioned, I am assuming it might be a problem). You really should run a test on your HD (if it is new-ish it has soemthing called SMART which reports a bunch of values for diagnostic purposes). I beleive the program speedfan can conduct such a test. Also check your voltages (using motherboardmonitor 5 or speedfan) and make sure that they are around what they should be and don't fluctate __________________ AGP won\'t fit in PCI-E... unless you use a really good hammer. ~Trotter

08-20-2005, 07:34 PM	#5 (permalink)
digitaloracle Ultra Techie Join Date: May 2004 Posts: 725	it is a progam that comes on a bootable floppy od CD and runs several very good tests on your ram. You can donwload it here. __________________ AGP won\'t fit in PCI-E... unless you use a really good hammer. ~Trotter

08-20-2005, 11:31 PM	#7 (permalink)
Counter-Strike Monster Techie Join Date: Apr 2005 Posts: 1,112	I would say re-format and see how it works. If it still does it, then check for bad PC parts.. __________________ Check out www.advancedgeeks.com Great new forum!

08-20-2005, 07:15 PM	#4 (permalink)
soup lightning True Techie Join Date: May 2005 Posts: 161	ok, ill try it. i have the smart hdd thing enabled. whats memtest?

08-20-2005, 08:06 PM	#6 (permalink)
soup lightning True Techie Join Date: May 2005 Posts: 161	theres a black window like a command prompt taht says enter disk image source file name. i have no idea what that means

08-21-2005, 07:53 AM	#8 (permalink)
soup lightning True Techie Join Date: May 2005 Posts: 161	ran memtest, it did 6 or 7 passes while i was gone and no errors. i cant reformat it. after it says to put the xp disc in it says theres no hdd. i reset the cmos too but nothing changed

08-21-2005, 09:57 AM	#9 (permalink)
DoomUK Ultra Techie Join Date: Aug 2004 Posts: 979	As Dark_Sniper* said, take the CMOS battery out, then make sure you reseat it properly. __________________ AMD X2 4400+ Toledo 1MB/Asus A8N-SLI Deluxe/2GB Kingston HyperX/SLI Gigabyte 7800 GTX 256MB/Creative SB Audigy 2 ZS Plat w/ Creative Inspire 6.1 speakers /180GB Hitachi PATA/19\" AG Neovo F-419 LCD/OCZ PowerStream 600W PSU/WinXP Home SP2

08-21-2005, 11:00 AM	#10 (permalink)
soup lightning True Techie Join Date: May 2005 Posts: 161	i did last night. everything but bf2 is working. that still freezes up and all my games are still loading really slow. windows is loading pretty slow too. takes a minute or two to get past the loading screen

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode