[jeff1000]

Hi, I need to connect my front usb ports to my mobo, heres a pic from my mobo manual.
http://img267.imageshack.us/img267/7338/usb5nz.jpg
My only problem is that there are connectors on the case which are
~ -D
~ +D
~ +VCC
~ Ground

where would these connectors go on the motherboard. the connectors are the little ones that you put on the HDD lights and Power switch and all that stuff. the small ones. So yeah thanks.

[Zanjo]

There should be a more detailed page in you instruction manual.

[Mr. Switch]

well, the plugs for the USB ports on the front of your computer should be labeled. than you'll need to plug them into the USB pins on the motherboard. if there are not plugs on your case for the front USB things, than i'm stumped becuase all the cases i've delt with that have front USB's have had cables comming out of the front for the USB connectors.

[jeff1000]

the problem is that the labelling on the plugs dont correspond with that of the mother board.

[Jayce]

I ran into the same problem... mostly because with my case lights on the front + the front usbs I don't have enough "ports" to power everything... at least that's how it looks...

Just figured I'd chime in with my similar problems...