Using IP URLs

digitaloracle · 06-25-2004, 06:44 PM

I am just wondering, in theory you can get to a web site by typing in the domain name or by using the server's ip. However, my router has an html config interface that i can get to by pointing my browser to it's internal ip. BUT how do I get to other web sites? Wouldn't it just look for the ip you typed on your local network?

PS- I really don't know a lot about this, so if you think you know what I'm asking, by all means answer based on what you think I'm asking

mikesgroovin · 06-25-2004, 08:43 PM

Correct, It will look similar to the ip address of your gateway/router.
First you have to find out what your website true ip address is:
Click start > run > type "cmd" (without quotes for windows 2000/XP) or "command" (w/o quotes for Windows 9x/ME) and hit enter
Then type "ping thewebsite.com" (exchange "thewebsite.com" with whatever website you are looking for. Your local DNS will then provide the IP address that the website resolves to.
Then open up internet explorer and just type in the IP address in the URL space.....should be it.

-Mike

squirrelly1 · 06-26-2004, 04:06 PM

Got it resolved yet?

Let me get this straight... You're wanting to access the internet through your router...

Here's how I normally do it with Windows or Linux...

I setup the internal IP (or use DHCP) and set my network adapter's (tcp/ip protocol) gateway to the address of my router and I also set the primary DNS to the address of my router...

for instance...

If my router's IP address is 192.168.55.3
I would set my machine up as 192.168.55.xxx (stay below 256)
and setup the Gateway and Primary DNS as 192.168.55.3

That'll do it... Sorry if I missed the point of your post.

Squirrelly1

06-25-2004, 06:44 PM	#1 (permalink)
digitaloracle Ultra Techie Join Date: May 2004 Posts: 725	Using IP URLs I am just wondering, in theory you can get to a web site by typing in the domain name or by using the server's ip. However, my router has an html config interface that i can get to by pointing my browser to it's internal ip. BUT how do I get to other web sites? Wouldn't it just look for the ip you typed on your local network? PS- I really don't know a lot about this, so if you think you know what I'm asking, by all means answer based on what you think I'm asking

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-2004, 08:43 PM	#2 (permalink)
mikesgroovin honk if you route packets Join Date: Sep 2003 Posts: 3,742	Correct, It will look similar to the ip address of your gateway/router. First you have to find out what your website true ip address is: Click start > run > type "cmd" (without quotes for windows 2000/XP) or "command" (w/o quotes for Windows 9x/ME) and hit enter Then type "ping thewebsite.com" (exchange "thewebsite.com" with whatever website you are looking for. Your local DNS will then provide the IP address that the website resolves to. Then open up internet explorer and just type in the IP address in the URL space.....should be it. -Mike

06-26-2004, 04:06 PM	#3 (permalink)
squirrelly1 Newb Techie Join Date: Jun 2004 Posts: 28	Got it resolved yet? Let me get this straight... You're wanting to access the internet through your router... Here's how I normally do it with Windows or Linux... I setup the internal IP (or use DHCP) and set my network adapter's (tcp/ip protocol) gateway to the address of my router and I also set the primary DNS to the address of my router... for instance... If my router's IP address is 192.168.55.3 I would set my machine up as 192.168.55.xxx (stay below 256) and setup the Gateway and Primary DNS as 192.168.55.3 That'll do it... Sorry if I missed the point of your post. Squirrelly1