[solidsteve]

ok this thread looks confusing

lets see if this can be worked out try these few things

first put the red, blue, green, yellow and white into 1 of component slots, there should be 1 red 1 left that connected to the white and yellow wire, test it with the switch on hdtv if it workes good

second take the yellow and white wire out and see is there is a space for them in the surround sound, should be a controller box where like you plug a optic cable and these in

third if i rember properly there should be a optic cable connector on the base of the wire, just optic wire that in to surround sound and take out yellow and white wire

if they fail take photos of the back or your tv and photos of the surround sound hub se we ca see what your looking at

[caseyhue]

Originally Posted by southfield

You have to plug in all 6 cables but make SURE that they're in they same set.. make any sense? In other words, don't plug the Green/Blue/Red (HD) cables into AV1 and the other 3 cables into AV2.

I read you messages about hooking up the xbox to make sound and I want to let u know you were dead on with the sound.. Thank you for your post.

caseyhue