[Antec-User]

Ahhhhh! Ok! I'll try it now..

Cuz the multiplier is x by the FSB and 8 to find the speed.... I'll do soem math to see what I'd need.. I'll set everything back..

I'll be back... Hopefully with good news.

---EDIT SECTION---

Wow.. the board made it to 235 before a BSOD.. I ran prime for a couple minutes between each stepping to look for any signs of instability... Made it to 240fsb @ 3.6g before a BSOD during prime.



Yeah.. this thing doesn't like it when I mess with the FSB on higher clocks.. I'm @ 17x CPU Mult and 220FSB, dropped down from 230 @ 1.550 Vcore and ram to 5-5-5-15... no workey.. I'm gonna try a 4-4-4-12..

What I'm @ now: BSOD @ the final load screen. Posting 3.85g

Mult @ 17.50x
FSB @ 220
DRAM @ 733 (lowest w FSB @ 220)
CPU/NB @ 12x mult
HT Link @ 800mhz (sweet spot)
DRAM Timing @ 4-4-4-12 (sticks are 5-5-5-15, but w the FSB @ 220 and Freq @ 773)
CPU VCore @ 1.550
CPU/NB @ 1.5125
CPU VDDA V @ Auto
DRAM V @ 2.17
HT V @ 1.30
NB V @ 1.20
NB 1.8v @ Auto
SB V @ Auto

CPU and PCIE Spread @ Disabled... Running 4 g or ram instead of 8 @ 1066 5-5-5-15 sticks rated @ 2.2v.

[zmatt]

You should run more than a few minutes of prime for it to be legit. Although I would recommend running Intel burn test instead. it is much shorter and gives you the same results.