Computers |
|
| | #1 (permalink) |
| Super Techie Join Date: May 2006 Location: Canada
Posts: 267
| Hey guys! I have a new computer here with an Aspire X Cruiser Case. I have an ATI X1900 XT video card and an AMD X2 4200 CPU. I am concerned about HEAT! Is this going to get to hot? If so, please give me some suggestions for what I can do to allow some better air flow in the case. Thank you.
__________________ Money Pit Intel Q6600 @ 3GHz eVGA 8800GTS 320mb SC 2GB Buffalo Firestix @ 750MHz Console Microsoft Xbox 360 |
| | |
| | #2 (permalink) |
| Super Moderator Join Date: May 2005 Location: Locked in a dungeon, Perth
Posts: 7,868
| why don't you find out what the running temperatures are like at idle and under load and we'll tell you what we think. its impossible to just answer you as there are too many variables e.g. your cabling and airflow and the output temperatures vary from individual chips.
__________________ Get FireFox Saxon's Blog|Saxon's Forum - CHECK IT OUT! Fold for tech forums. MY COMPUTER HELPS CURE CANCER! "Sniffing Powdered Ubuntu CDs Cures Cancer!" - TuxMachines.org /Q6600@3.0GHz/2x1GB Kingston DDR2-800/Gigabyte P35-DS3R/XFX 7900GS 256MB|Antec TPII 480w\2x250gb+80gb WD Caviar\WinFast DTV-1000T\TT Soprano\ I'm sorry but I do not accept support requests via IM, email, or personal messages You can contact me for Forum related issues via PM only. ![]() ![]() |
| | |
| | #3 (permalink) |
| Lord Techie | Download everest or whatever temperature monitor program. Leave your computer in windows for like 10 minutes and record the temp. Then play a game for like 10 minute and record the temp there to. Those would be considered your idle and load temps. Usually your idle temps shouldnt go above 60C for your processor, and hmm how hot do the X1900XT get's im guessing 80C with the stock heatsink.
__________________ E8400 | Abit IP35 Pro | 2x2GB G.Skill DDR2-800 | HIS HD3870 | 520HX | CM690 AIM/Xfire - pzerofgh Make Free Money by Doing Offers!! Really Works CLICK NOW |
| | |
| | #5 (permalink) |
| Master Techie | The first thing to do is ditch the stock HSF on the videocard, and get a Zalman or something. The stock AMD heatsincs are pretty nice, so unless you have problems or want to overclock a lot, don't worry about that. Grab a couple intake/exhaust fans, as big as will fit. Then tidy up your wires however you want to, and you should be all set. |
| | |
| | #6 (permalink) |
| Master Techie Join Date: Feb 2005
Posts: 2,576
| Yea just basically get a few fans clean up the wires and take out any dust, but generally your computer will be fine. If I'm not mistaken your videocard blows heat out of the case through a really cool fan design.
__________________ ![]() |
| | |
| | #7 (permalink) |
| Ultra Techie | make sure you have an intake and exaust fan and that there arn't a bunch of wires inbetween the intake, mobo, and exaust. this is half the battle of heat management. the other half is the chipset coolers. the Zalman GPU coolers are sweet w/ the 2 heat pipes, i recommend. the thermaltake Big Typhoon is a sweet CPU cooler. of course if your really worried about heat, go with liquid cooling. |
| | |
| | #8 (permalink) |
| Self Proclaimed Immortal | i dont think people understand microchips fully. i think people try to baby their computers way too much. i agree with keeping my case cool and all, so i dont burn something up, but i think watercooling is way over the top for X2 4200 and X1900XT. you have to understand that these chips are made to withstand excessive amounts of heat, most are good up to 150 degrees farenheit. i would never get water cooling unless i had a 3.0 ghz+ dual core CPU and two or more vid cards. i think this guy just needs some well placed fans and hes set. keep the stock cooler on that X1900XT, they are very good at moving heat. |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |