First Time OC'ing

Wog2000 · 11-11-2007, 06:50 PM

OK, I read a lot of posts and this is what I did... I put my CPU at 1.55v and my RAM at 2.1v in BIOS. Then I disabled C1E in BIOS. I used AI Suite with AI Booster and set my CPU at 344.0. I am running PRIME95 25v now and AI Suite shows 3104.67MHz and the temps are 56c CPU and 45c System. My FSB is at 1379.79. and 0345.00 X 09.0. Am I doing it OK?

Wog2000 · 11-12-2007, 02:15 AM

Please let me know if this sounds good. I dont want to screw up my computer.

and, anyone having any luck oc'ing the hd 2900ht ddr4?

Preacher · 11-12-2007, 06:41 AM

Lower your CPU Vcore NOW !

Wog2000 · 11-12-2007, 11:47 AM

OK, I lowered it to 1.35v. Is that OK? My temp is around 40c on prime95

Vaanish · 11-12-2007, 12:18 PM

Quote:

Originally Posted by Wog2000

OK, I lowered it to 1.35v. Is that OK? My temp is around 40c on prime95

Yes that is fine now.

Wog2000 · 11-12-2007, 12:30 PM

I can't seem to OC my video card. As soon as I do any increase it freezes. I am using CCC to adjust the voltage. Since I am running Vista 64bit I can't use ATITools. Any suggestions?

Vaanish · 11-12-2007, 12:33 PM

Driver version? Give Riva Tuner a try.

Wog2000 · 11-12-2007, 12:44 PM

Do you know what the max temp i want to stay under on my video card? I am not sure which driver I have. Diamond says that since I am running 64bit that I'm going to have a hard time with OC'ing. Do you know if that is true?

Wog2000 · 11-13-2007, 03:05 PM

OK, I ran Everest last night and all went well. I set all RAM settings on auto except I did a manuel setting of 2.2 volts. Also, I increased my CPU to 1.35 volts. I am trying to get my rig as optimized as possible for Crysis. Can you please take a look and let me know if I can do better. I just spent almost an hour trying to show a screen print but I just can't seen to figure it out so i will just tell you the info...

CPU-Z says Core Voltage 1.320 V, Core Speed 3203.9 MHz, Multi X 9.0, Bus 356.0 MHz, FSB 1424.0MHZ,

SpeedFan says, Sys 37c, CPU 48c, AUX 122c, Core 0 45c, Core 1 40c, Core 2 35c, and Core 3 39c. CPU fan is 2265 RPM

Wog2000 · 11-13-2007, 03:06 PM

I used AI Booster for the rest

11-11-2007, 06:50 PM	#1 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	First Time OC'ing OK, I read a lot of posts and this is what I did... I put my CPU at 1.55v and my RAM at 2.1v in BIOS. Then I disabled C1E in BIOS. I used AI Suite with AI Booster and set my CPU at 344.0. I am running PRIME95 25v now and AI Suite shows 3104.67MHz and the temps are 56c CPU and 45c System. My FSB is at 1379.79. and 0345.00 X 09.0. Am I doing it OK? __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS

11-12-2007, 02:15 AM	#2 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing Please let me know if this sounds good. I dont want to screw up my computer. and, anyone having any luck oc'ing the hd 2900ht ddr4? __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS Last edited by Wog2000; 11-12-2007 at 02:27 AM.

11-12-2007, 06:41 AM	#3 (permalink)
Preacher Master Techie Join Date: Aug 2006 Location: Ra'anana, Israel Posts: 2,303	Re: First Time OC'ing Lower your CPU Vcore NOW ! __________________

11-12-2007, 11:47 AM	#4 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing OK, I lowered it to 1.35v. Is that OK? My temp is around 40c on prime95 __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS

11-12-2007, 12:30 PM	#6 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing I can't seem to OC my video card. As soon as I do any increase it freezes. I am using CCC to adjust the voltage. Since I am running Vista 64bit I can't use ATITools. Any suggestions? __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS

11-12-2007, 12:33 PM	#7 (permalink)
Vaanish Monster Techie Join Date: Feb 2007 Location: Yorkshire, UK Posts: 1,691	Re: First Time OC'ing Driver version? Give Riva Tuner a try.

11-12-2007, 12:44 PM	#8 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing Do you know what the max temp i want to stay under on my video card? I am not sure which driver I have. Diamond says that since I am running 64bit that I'm going to have a hard time with OC'ing. Do you know if that is true? __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS

11-13-2007, 03:05 PM	#9 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing OK, I ran Everest last night and all went well. I set all RAM settings on auto except I did a manuel setting of 2.2 volts. Also, I increased my CPU to 1.35 volts. I am trying to get my rig as optimized as possible for Crysis. Can you please take a look and let me know if I can do better. I just spent almost an hour trying to show a screen print but I just can't seen to figure it out so i will just tell you the info... CPU-Z says Core Voltage 1.320 V, Core Speed 3203.9 MHz, Multi X 9.0, Bus 356.0 MHz, FSB 1424.0MHZ, SpeedFan says, Sys 37c, CPU 48c, AUX 122c, Core 0 45c, Core 1 40c, Core 2 35c, and Core 3 39c. CPU fan is 2265 RPM __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS Last edited by Wog2000; 11-13-2007 at 03:06 PM. Reason: Lacking info

11-13-2007, 03:06 PM	#10 (permalink)
Wog2000 Junior Techie Join Date: Sep 2007 Location: Montreal, Canada Posts: 64	Re: First Time OC'ing I used AI Booster for the rest __________________ Q6600 G0\|Thermalright ULTRA-120\|Diamond HD 2900 XT 1GB GDDR4\|4x2gig Ram\|Vista Ultimate 64-bit\|PC Power & Cooling Silencer 750 Quad (Red)\|4x WD Caviar SE16 750GB SATA II\|Sony NEC Optiarc SuperMulti SATA\|Cooler Master Stacker 830 w/7-120mm case fans\|Samsung 226BW\|G15 Keyboard\|Lachasis Mouse\|Altec Lansing FX5051\|TrippLite UPS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Time keeps getting messed up	kileak	Everything Laptops	10	09-23-2007 05:25 PM
Time for a new monitor?	Captain Murphy	Building, Buying, or Upgrading High Performance PC Systems	15	09-04-2007 01:18 PM
New Monitor Time.... I guess??	sadisticmidget	Building, Buying, or Upgrading High Performance PC Systems	17	08-26-2007 07:32 PM
OCing: X2 3600+, evga 8800, and RAM	jfenwick	Overclocking, Case Mod, Tweaking PC Performance	45	08-25-2007 05:23 AM
Unique World's First Shipping Time Based Comparison Shopping	pdqdeals	Windows Operating Systems and Software	1	04-09-2007 04:33 AM