Conroe overclock opinions

plant · 01-21-2007, 02:29 PM

Evening all.
Have gotten my conroe E6600 up to about 3060, leaving the multiplier at 9, and changing the FSB to 340. I did this with a voltage of 1.4v, and my CPU temp hits 47 whilst running prime 95. Any comments/ways i can improve this?

plant · 01-21-2007, 02:30 PM

oh, and im running OCZ platinum 800mhz ram. Dont really understand RAM dividers so far!

toxicity_27 · 01-21-2007, 02:56 PM

Is that while running two instances of prime 95?

plant · 01-21-2007, 03:02 PM

nope, will try that now.

plant · 01-21-2007, 03:05 PM

doesnt seem to wanna open twice? Anyway im now at 3240 still on 1.4v and topping out at 50 degrees. Id say thats a decent job, getting low 15's in prime 95

toxicity_27 · 01-21-2007, 03:13 PM

Is this also with the stock hsf or an aftermarket one?

plant · 01-21-2007, 03:16 PM

zalman baby

RalliArt882 · 01-21-2007, 06:12 PM

How about your motherboard?

plant · 01-21-2007, 06:25 PM

tisver gut no?

01-21-2007, 02:29 PM	#1 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	Conroe overclock opinions Evening all. Have gotten my conroe E6600 up to about 3060, leaving the multiplier at 9, and changing the FSB to 340. I did this with a voltage of 1.4v, and my CPU temp hits 47 whilst running prime 95. Any comments/ways i can improve this?

01-21-2007, 02:56 PM	#3 (permalink)
toxicity_27 Ultra Techie Join Date: Jun 2004 Location: Minnesota Posts: 778	Is that while running two instances of prime 95? __________________

01-21-2007, 03:13 PM	#6 (permalink)
toxicity_27 Ultra Techie Join Date: Jun 2004 Location: Minnesota Posts: 778	Is this also with the stock hsf or an aftermarket one? __________________

01-21-2007, 06:12 PM	#8 (permalink)
RalliArt882 Ultra Techie Join Date: Aug 2006 Posts: 570	How about your motherboard? __________________ Stacker 830 - e6600 @ 3.6ghz - Eva 9800GTX+ X-Fi Xtrememusic - 2x1GB Corsair Dominator Sceptre 20.1" - Logitech Z5500

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2007, 02:30 PM	#2 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	oh, and im running OCZ platinum 800mhz ram. Dont really understand RAM dividers so far!

01-21-2007, 03:02 PM	#4 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	nope, will try that now.

01-21-2007, 03:05 PM	#5 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	doesnt seem to wanna open twice? Anyway im now at 3240 still on 1.4v and topping out at 50 degrees. Id say thats a decent job, getting low 15's in prime 95

01-21-2007, 03:16 PM	#7 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	zalman baby

01-21-2007, 06:25 PM	#9 (permalink)
plant True Techie Join Date: May 2006 Posts: 233	tisver gut no?