Computer Forums - View Single Post

xtmpacygax · 08-07-2006, 10:14 AM

I ran the program and it sees my hard drive there, which is good, but then I do Analyze and it says Partition: Read Error. So I then press proceed and it goes to a screen something like this:

TestDisk 6.4, Data Recovery Utility, June 2006
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/sdb - 203 GB / 189 GiB - CHS 24792 255 63
Analyse cylinder 2/24791: 00%
Read error at 1/2/1 (lba=16191)

Is it going through 24791 things, because that will take forever. It is only on 3/24791 right now.

08-07-2006, 10:14 AM	#37 (permalink)
xtmpacygax Junior Techie Join Date: Aug 2006 Posts: 61	I ran the program and it sees my hard drive there, which is good, but then I do Analyze and it says Partition: Read Error. So I then press proceed and it goes to a screen something like this: TestDisk 6.4, Data Recovery Utility, June 2006 Christophe GRENIER <grenier@cgsecurity.org> http://www.cgsecurity.org Disk /dev/sdb - 203 GB / 189 GiB - CHS 24792 255 63 Analyse cylinder 2/24791: 00% Read error at 1/2/1 (lba=16191) Is it going through 24791 things, because that will take forever. It is only on 3/24791 right now.