Thanks for tuning in and commenting guys!
I pre-installed the
250mm cooling fan from performance-pcs in the top panel today, I wanted the mounting holes made before the chassis is handed off to Brad for paint.
NZXT's mounting location for included 190mm cooling
These 2 pop-rivets fasten on the perforated top panel, they prevent the 250mm fan from sitting flush and center,
I'm cutting notches in the 250 cooling fan's frame, so it will seat over the rivets
2nd rivet we need to clear.
A notch cut the frame of the 250mm cooling fan
Heres the location of the new mounting holes for the fan. (5/32 drill bit)
10/32 x 5/8" black oxide socket head machine screws
http://www.mnpctech.3dpixelnet.com/p...emodblog9q.jpg
Now the fan seats flush and center beneath the top perforated panel.
