Its just like Splatoid said. I was just running the computer out of the case. I was doing alot of MB swapping and testing different things a while back and when i found the right combination i wanted i just didnt feel like putting it all back in the case right away. So i have been running it...
For the last few months my computer has been out of the case. So to say just layed out on the table. I got tired of swapping MBs into the case so i just left it. Anyway I put it all back in the cast today, same as it was. Nothing about the setup changed except the 3 large case fans. Well now...
thanks for the tips.. i think im going with the 7600...if i get the other car how could i hook up to the s-video port with my monitor having the regular serial type. is there an adapter? do you get better performance from the s-video?
Im upgrading to the p5b deluxe board which has pci express only. my current card(PNY Verto GeForce 5200) is agp only. I have around 150-200 to spend on a new card. My monitor doesnt have an s-video input so keep that in mind. There seems to be a zillion different vid cards and thats one thing...
i dont uderstand why i would have this on my home PC. Even i put my modem on standby it still shows its connected and is transfering info. When i first turn my pc on i have to reset the modem and router to be able to get on the internet through my comcast broadband... Anyone know how to get rid...
I went to Dos and did an Ipconfig/all and at the bottom it said Lease obtained with todays date and the lease expires on the 27th... what is this for? the reason I did the ip config is because today i started getting this internet gateway connection in my icon tray and i cant make it go away and...
I have an Abit IS7 MB and when i run Prime95 to test my rig i get Temps. of over 70 c on PWM. First off what does the PWM stand for? is it the chipset? my CPU is hitting 57 C which i find to be tolorable since its a 3.0 prescott running at almost 3.6. It used to get upto 70 before i polished...
I just bought some new OCZ pc3500 ramhttp://www.newegg.com/Product/Product.asp?Item=N82E16820146950 , installed it and windows would load and then freeze or just reboot, so i put my old ram back in and it works fine. I tried the new ram again and now when i boot up i get a boot error saying CPU...
I used to have the same problem with my old speakers. Although I was picking up a CB frequency and it happed very infrequently. I changed my desk setup so my cordless phone and wireless router were no longer sitting right next to it. I havent had the problem since but I also upgraded the...
Of RAM you Perves LoL..anyway i accidently touched the MB with some metal while it was running. It was right next to the ram and I also touched part of the ram. The part of the board I touched were the little circuits with C### and R### lables right by the edge. Well now I'm getting an alarm...
Well my 2nd MSI board crashed on me, same as the first. I just got my replacement from NewEgg thursday and swapped it with the ABIT i was using, with no problems i might add. Anyway the first one didnt even make it through windows installation, this 2nd one lasted about 16 hrs and crashed...
I'm wondering how latency effects the speed of the ram? I've read that the lowest latency ram isnt always the best to OC on. but if a lower latency is better why wouldn't it better to OC with it.